Medical masks
3A-Surgical Mask
From：
安徽富美医疗科技有限公司
Date：2020-05-29 17:31:42
Hits：1752
Belong to：Medical masks
 |
3A-Surgical MaskHits：1752
Time：2020-05-29 17:31:42 |
|---|
Application
Worn by personnel to cover the mouth, nose and chin, the mask provides a physical barrier to block exhalation or ejection of pollutants from mouth and nose, and to reduce breathing in airborne particles.
.jpg)
Wearing Instructions
l.Hold the mask by the ear loops with the colored side facing outwards and the nose bridge upwards, and place both ear loops around both ears.
2.Bend the nose clip to match the shape of the nose to prevent unfiltered air from entering.
3.Pull the mask to your chin to produce a tight seal.
Protection
SOFT & EASY TO BREATHE (Non-sterile)
Product Specification
1、Mask length: > 170 mm(6.69in.)
2、Mask expansion width: 165 mm(6.49in.). Post-stack width is 95 mm(3.74in.) with three stacks in the middle. Each stack width is not less than 10 mm(0.39in.). The nose clip is located on the upper edge of the mask, and the outside of the mask is darker in color.
3、The width of the support part is not more than 10 mm(0.39in.), and the position of the upper nose clip is not more than 16 mm(0.63in.).
4、Nose clip: length > 80 mm(3.15in.); width approximately 3 mm(0.12in.)
5、Ear loop: 180 mm(T.09in.) in length and 3 mm(0.12in.) in diameter, composed of polyester, spandexand other materials, welded on the inner layer not more than 10 mm(0.39in.) from the edge.
Parameter of Single-use Surgical Mask
WARNING
1、The mask does not eliminate the risk of contracting any disease or infection.
2、Failure to properly use and maintain this product could result in illness or even death.
3、Only for one-time use, please destroy and dispose according to regulations after use.
4、Please use within the validity period.
5、DO NOT use if package is damaged.
6、Please refer to the instructions before use.
7、For adult use only.
8、Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask. Do not wash.
9、Intended for use in environments with moderate fluid exposure.
10、This face mask is authorized for distribution under FDA enforcement discretion only for the duration of the declaration that circumstances exist justifying the authorization of the emergency use of face masks under section 564(b)(1) ofthe Act, 21 U.S.C. § 360bbb-3(b)(l), unless the authorization is terminated or revoked sooner.
Worn by personnel to cover the mouth, nose and chin, the mask provides a physical barrier to block exhalation or ejection of pollutants from mouth and nose, and to reduce breathing in airborne particles.
Wearing Instructions
l.Hold the mask by the ear loops with the colored side facing outwards and the nose bridge upwards, and place both ear loops around both ears.
2.Bend the nose clip to match the shape of the nose to prevent unfiltered air from entering.
3.Pull the mask to your chin to produce a tight seal.
Protection
SOFT & EASY TO BREATHE (Non-sterile)
Product Specification
1、Mask length: > 170 mm(6.69in.)
2、Mask expansion width: 165 mm(6.49in.). Post-stack width is 95 mm(3.74in.) with three stacks in the middle. Each stack width is not less than 10 mm(0.39in.). The nose clip is located on the upper edge of the mask, and the outside of the mask is darker in color.
3、The width of the support part is not more than 10 mm(0.39in.), and the position of the upper nose clip is not more than 16 mm(0.63in.).
4、Nose clip: length > 80 mm(3.15in.); width approximately 3 mm(0.12in.)
5、Ear loop: 180 mm(T.09in.) in length and 3 mm(0.12in.) in diameter, composed of polyester, spandexand other materials, welded on the inner layer not more than 10 mm(0.39in.) from the edge.
Parameter of Single-use Surgical Mask
| Name | Parameter |
| Product name | Single-use Surgical Mask |
| Material | Polypropylene spunbond nonwoven fabric, polypropylene melt-blown nonwoven, metal wire with plastic covering nose clip, polyester/nyton spandex blend ear loops |
| Product model | FE2311 |
| Size | 175 mmX95 mm / 6.89in.X3.74in. |
| Product application scope and purpose | For protection against inhalation of pathogens and airborne liquid droplets |
| Expiration date | 2 years after production |
| Packaging specification | 10pcs/bag; 50pcs/box; 2000pcs/case |
| Storage | Store in a room with relative humidity level of no more than 80%, no corrosive gas and good ventilation to avoid high temperature. |
1、The mask does not eliminate the risk of contracting any disease or infection.
2、Failure to properly use and maintain this product could result in illness or even death.
3、Only for one-time use, please destroy and dispose according to regulations after use.
4、Please use within the validity period.
5、DO NOT use if package is damaged.
6、Please refer to the instructions before use.
7、For adult use only.
8、Use this product immediately after the package is opened. Avoid hand contact within the interior part of the mask. Do not wash.
9、Intended for use in environments with moderate fluid exposure.
10、This face mask is authorized for distribution under FDA enforcement discretion only for the duration of the declaration that circumstances exist justifying the authorization of the emergency use of face masks under section 564(b)(1) ofthe Act, 21 U.S.C. § 360bbb-3(b)(l), unless the authorization is terminated or revoked sooner.
- Previous：Nothing
- Next：3A-KN95 Respirator
